Machine base re-levelling in the United Kingdom
Sunken machine bases brought back level to the tolerance the equipment needs.
About machine base re-levelling
What this work involves
A machine base that has sunk even a few millimetres can pull a press or CNC machine out of alignment, strain its fixings and wear its bearings. The ground below the base may have settled, or the slab around it may have moved while the base stayed put.
The specialist measures the base against the slab, finds where support is missing and advises on a precise lift, using small injection points and monitoring level as the material expands. Send the machine details, the weight and the tolerance needed, and the work is priced on those.
The essential facts in brief
Machine base and plant foundation settlement in the UK: how sunken bases are lifted to tolerance with resin, and how to enquire.
Ready to sort your concrete levelling job?
Describe what you have found, choose the service that fits, and a specialist covering your area will reply with the next step and how the work is priced.
- Residential, commercial and infrastructure jobs
- Pricing depends on the job, quoted per enquiry
- Serving enquiries from across the United Kingdom
How it compares
| Polyurethane resin injectionRecommended | Epoxy grout packing | Shimming | Full break-out and relay | |
|---|---|---|---|---|
| Out of service | 2–4 hours | 24–48 hours | Hours | 2–4 weeks |
| Traffic management | N/A | N/A | N/A | N/A |
| Invasiveness | Low | Low | Low | High |
| Addresses void | Yes | No | No | Yes |
| Longevity | 25+ years | 10–15 years | 1–3 years | 25+ years |
| Relative cost | Baseline | Similar | Lower | Much higher |
Does this describe your concrete?
- A spirit level on the machine bed shows it has drifted again, and parts are wearing unevenly.
- Cracks open around the plinth where the base meets the floor slab.
- The vibration or noise from the machine has changed.
- Grout under the baseplate is crumbling.
- Anchor bolts have worked loose, or work is coming off the machine outside tolerance.
How the job gets done
Machine details
The specialist asks for the machine weight, the tolerance it needs and any alignment readings already taken.
Base readings
A precision level across the base shows how far it has tilted and which side has dropped.
Fine lifting
Small injections are made under the low side while readings are taken after each one, so the base rises in small steps.
Alignment check
The base is read again and the machine fitter can recheck alignment against the new levels.
Concrete levelling work across the United Kingdom
Written price before any work. Written cost details are provided after the specialist assesses the job.
Written findings from the specialist. The specialist records findings, cause of movement, and work carried out.
Specialists who know the ground. A local specialist knows the soil conditions and structures in your area.
No obligation to proceed. Read the findings and decide at your own pace; nobody will chase you to go ahead.
Keeping a base within tolerance
Tolerances come from the machine
A press, a CNC or a generator set has a levelness tolerance set by its maker. The specialist reads the figure from the machine documentation and measures the base against it.
Small lifts, measured often
Machine bases usually need a gentle lift, so the specialist raises in steps and checks level with an instrument after each one.
Realignment afterwards
Once the base has moved, the machine may need its own alignment checked by the maintenance engineer. The written findings give them the final levels.
Machine base re-levelling across the United Kingdom
Specialists cover machine base re-levelling across towns including Birmingham · Edinburgh · Glasgow · Leeds · Liverpool · London · Manchester · Sheffield and many more areas throughout the United Kingdom, handling sunken slabs, cracked paths, and uneven concrete surfaces
Related concrete-levelling services
Airport & runway re-levelling
Sunken apron, stand and taxiway slabs lifted back to grade without full replacement.
Read about airport & runway re-levellingBridge re-levelling
Approach slabs and deck-end concrete that have dropped at the abutment.
Read about bridge re-levellingCar park re-levelling
Ponding and sunken bays in car parks, corrected a section at a time.
Read about car park re-levellingDriveway re-levelling
Driveway slabs that have sunk or tilted toward the house, lifted in place.
Read about driveway re-levellingFactory floor re-levelling
Production floors that have dipped, corrected around your shift pattern.
Read about factory floor re-levellingGarage floor re-levelling
Garage floors that have dropped or cracked, lifted from inside through small holes.
Read about garage floor re-levellingGarden step and threshold re-levelling
Sunken garden steps and door thresholds, and the gaps that open beside them.
Read about garden step and threshold re-levellingHGV yard re-levelling
Rutted and stepped lorry yards, lifted in phases so vehicles keep moving.
Read about hgv yard re-levellingHarbour and seawall re-levelling
Quay aprons and seawall copings undermined by tidal wash, assessed and lifted.
Read about harbour and seawall re-levellingHome re-levelling with resin injection
Sloping and cracked concrete floors inside houses, checked for cause before any lifting.
Read about home re-levelling with resin injectionHotel re-levelling
Sunken forecourts, pool surrounds and terraces fixed with minimal disturbance to guests.
Read about hotel re-levellingLoading bay re-levelling
Dock aprons that have dropped, lifted so trailers and levellers meet properly again.
Read about loading bay re-levellingOffice and retail floor re-levelling
Shop and office entrances, forecourts and floors that have sunk, repaired while you trade.
Read about office and retail floor re-levellingPatio re-levelling
Patios and paths with rocking, dipped slabs, lifted without lifting the paving.
Read about patio re-levellingPetrol station re-levelling
Forecourt slabs and pump islands that have settled, with falls to the drains restored.
Read about petrol station re-levellingPlant room re-levelling
Plant room slabs that have dropped under heavy equipment, lifted around fixed plant.
Read about plant room re-levellingRail re-levelling
Platforms, walkways and slab track that have sunk, lifted within short access windows.
Read about rail re-levellingRoad re-levelling
Dips, steps and sunken panels in concrete roads, traced to their cause and lifted.
Read about road re-levellingUtilities re-levelling
Concrete sinking along cable, gas and water trenches, and low chamber surrounds.
Read about utilities re-levellingWalkway & entrance re-levelling
Trip steps at slab joints on paths and entrances, lifted level without new paving.
Read about walkway & entrance re-levellingWarehouse floor re-levelling
Dipped aisles and stepped joints in warehouse floors, fixed with the building in use.
Read about warehouse floor re-levellingWarehouse racking re-levelling
Leaning racking uprights traced to sunken slabs and lifted back to level.
Read about warehouse racking re-levellingThe short answers
Unsure which fix applies? Browse the services
How precise can the lift be?
The specialist raises the base in small increments, checking with a precision level after each injection. For most industrial machines, a lift accurate to within half a millimetre is achievable with this method.
Does the machine need to be moved?
The base is lifted in place. The machine does not need to be removed, but it must be isolated and its fixings released so the base can move freely. The machine fitter handles the isolation before the specialist starts.
What if only one corner of the base has dropped?
A partial drop is common. Injection is concentrated under the low side and level readings are taken at all four corners throughout, so the base comes up evenly rather than overcorrecting on one side.
What information is needed before the visit?
The machine weight, the levelness tolerance from the manufacturer's documentation, and any existing alignment readings are useful. The specialist uses these to set the target and choose the right injection material.