Plant room re-levelling in the United Kingdom
Plant room slabs that have dropped under heavy equipment, lifted around fixed plant.
About plant room re-levelling
What this work involves
Plant room floors carry boilers, chillers, tanks and pumps, and they are often cast over service trenches and pits. If the slab drops, pipework is strained at the connections and drainage falls reverse so water collects against equipment.
A specialist surveys the floor, notes where the settlement runs, and advises on lifting by injection, which can be done around fixed plant with small drill holes. Describe the room, the equipment on the slab and how long you can spare it offline, and the price follows.
The essential facts in brief
Plant room floor subsidence in the UK: sunken slabs under boilers, tanks and pumps, how they are lifted, and how to enquire.
Ready to sort your concrete levelling job?
Describe what you have found, choose the service that fits, and a specialist covering your area will reply with the next step and how the work is priced.
- Residential, commercial and infrastructure jobs
- Pricing depends on the job, quoted per enquiry
- Serving enquiries from across the United Kingdom
How it compares
| Polyurethane resin injectionRecommended | Full break-out and relay | Epoxy screed | Self-levelling compound | |
|---|---|---|---|---|
| Out of service | 2–4 hours | 2–4 weeks | 3–5 days | 48–72 hours |
| Traffic management | N/A | N/A | N/A | N/A |
| Invasiveness | Low | High | Medium | Medium |
| Addresses void | Yes | Yes | No | No |
| Longevity | 25+ years | 25–40 years | 10–20 years | 5–10 years |
| Relative cost | Baseline | Much higher | Higher | Similar |
Does this describe your concrete?
- Boilers, pumps or tanks lean slightly and the pipework connections are under strain.
- The slab around the plinths has dropped and left a gap under the housekeeping pads.
- Condensate or drain lines have lost their fall.
- Floor cracks follow a trench or drain run.
- Water pools away from the floor drain.
How the job gets done
Access review
The specialist checks the door width, headroom and what plant must stay running while the floor is treated.
Plinth readings
Levels on the floor and plinths show which supports have settled and by how much.
Tight-space lift
Compact injection equipment raises the slab or plinth in small steps, working around boilers, pumps and pipes.
Pipework check
Flexible joints and connections are looked at for strain, and the final levels are written down.
Concrete levelling work across the United Kingdom
Written price before any work. Written cost details are provided after the specialist assesses the job.
Written findings from the specialist. The specialist records findings, cause of movement, and work carried out.
Specialists who know the ground. A local specialist knows the soil conditions and structures in your area.
No obligation to proceed. Read the findings and decide at your own pace; nobody will chase you to go ahead.
Low ceilings and tight corners
Access first
Plant rooms often have narrow doors and little headroom. The survey notes what kit will fit and where injection holes can go without moving boilers, tanks or pumps.
Pipework stays connected
Rigid pipework and cable trays do not like movement. The specialist keeps the lift small and gradual, and notes any strain on connections.
Wet floors and drains
A sunken slab around a floor drain or sump can leave puddles by the equipment. The findings check the floor falls against the drain position.
Plant room re-levelling across the United Kingdom
Specialists cover plant room re-levelling across towns including Birmingham · Edinburgh · Glasgow · Leeds · Liverpool · London · Manchester · Sheffield and many more areas throughout the United Kingdom, handling sunken slabs, cracked paths, and uneven concrete surfaces
Related concrete-levelling services
Airport & runway re-levelling
Sunken apron, stand and taxiway slabs lifted back to grade without full replacement.
Read about airport & runway re-levellingBridge re-levelling
Approach slabs and deck-end concrete that have dropped at the abutment.
Read about bridge re-levellingCar park re-levelling
Ponding and sunken bays in car parks, corrected a section at a time.
Read about car park re-levellingDriveway re-levelling
Driveway slabs that have sunk or tilted toward the house, lifted in place.
Read about driveway re-levellingFactory floor re-levelling
Production floors that have dipped, corrected around your shift pattern.
Read about factory floor re-levellingGarage floor re-levelling
Garage floors that have dropped or cracked, lifted from inside through small holes.
Read about garage floor re-levellingGarden step and threshold re-levelling
Sunken garden steps and door thresholds, and the gaps that open beside them.
Read about garden step and threshold re-levellingHGV yard re-levelling
Rutted and stepped lorry yards, lifted in phases so vehicles keep moving.
Read about hgv yard re-levellingHarbour and seawall re-levelling
Quay aprons and seawall copings undermined by tidal wash, assessed and lifted.
Read about harbour and seawall re-levellingHome re-levelling with resin injection
Sloping and cracked concrete floors inside houses, checked for cause before any lifting.
Read about home re-levelling with resin injectionHotel re-levelling
Sunken forecourts, pool surrounds and terraces fixed with minimal disturbance to guests.
Read about hotel re-levellingLoading bay re-levelling
Dock aprons that have dropped, lifted so trailers and levellers meet properly again.
Read about loading bay re-levellingMachine base re-levelling
Sunken machine bases brought back level to the tolerance the equipment needs.
Read about machine base re-levellingOffice and retail floor re-levelling
Shop and office entrances, forecourts and floors that have sunk, repaired while you trade.
Read about office and retail floor re-levellingPatio re-levelling
Patios and paths with rocking, dipped slabs, lifted without lifting the paving.
Read about patio re-levellingPetrol station re-levelling
Forecourt slabs and pump islands that have settled, with falls to the drains restored.
Read about petrol station re-levellingRail re-levelling
Platforms, walkways and slab track that have sunk, lifted within short access windows.
Read about rail re-levellingRoad re-levelling
Dips, steps and sunken panels in concrete roads, traced to their cause and lifted.
Read about road re-levellingUtilities re-levelling
Concrete sinking along cable, gas and water trenches, and low chamber surrounds.
Read about utilities re-levellingWalkway & entrance re-levelling
Trip steps at slab joints on paths and entrances, lifted level without new paving.
Read about walkway & entrance re-levellingWarehouse floor re-levelling
Dipped aisles and stepped joints in warehouse floors, fixed with the building in use.
Read about warehouse floor re-levellingWarehouse racking re-levelling
Leaning racking uprights traced to sunken slabs and lifted back to level.
Read about warehouse racking re-levellingThe short answers
Unsure which fix applies? Browse the services
Does the boiler or chiller have to be switched off?
Not necessarily. Injection is done around the equipment rather than under it while it runs, but the specialist checks whether any plinth or pipe support must be isolated before it is lifted. That is confirmed at the access review.
What if the ceiling is too low for standard equipment?
Compact injection heads are available for restricted headroom. The specialist checks the room dimensions before the visit and brings the right equipment for the space.
Can pipe connections be damaged by lifting the floor?
Rigid pipework can be strained if the slab rises unevenly or too quickly. The specialist raises in small measured steps and checks visible connections between each one.
How is the floor surface left after the work?
Drill holes are patched with a mortar suitable for the plant room environment. Where floors are painted or have an anti-slip coating, the made-good areas are described in the written findings.